GAS FITTING

Residential Gas Fitting Auckland

Euro Plumbing can take care of all your domestic gas fitting requirements:

We offer:

Appliance installation and servicing
Mains gas and LPG installations
Consultancy service with a Certifying Gas fitter for design and quotations.
We can work with your Architect to design a system for your home.
Complete design and build to your requirements and specifications
New homes, repairs and renovations
We can inspect, test and certify gas installations, repairing, altering and advising where
required.

Hot water systems – gas cylinders or instant continuous flow such as Rheem, Rinnai or Bosch, we quote, supply and install the right system for you.

Whether you are building a new home or renovating your existing home, or if you simply want your gas system checked and maintained, call Euro Plumbing today and talk to our qualified technician and Auckland gas fitter.

We’re not satisfied until you are!

Commercial Gas Fitters In Auckland

No job is too big, small or complex for Euro Plumbing Ltd. With our experienced, certified gas fitters we can offer a complete design and build service for any commercial gas fitting application.

From the simplest of appliance installations to solving complex design issues in multi-storey buildings, Euro Plumbing Ltd. offers cost effective and efficient solutions for your business.

Natural Gas or LPG
Multi-cylinder installations
Boilers/ Calorifiers/ Storage vessels – all sizes and types
Commercial gas lines
Commercial gas heating systems
Gas line thrusting and directional drilling
Commercial gas appliance installations
Hot water systems including central heating
Flue gas analysis

Most central heating systems such as radiators and underfloor heating can be powered by gas. Euro plumbing can design a combined gas system that will quickly and efficiently heat your home and domestic hot water.

GAS FIRE PLACE INSTALLATION (natural gas and LPG)

PRICE: $ 1499 including (GST incl) *conditions apply Book Now

Ideal scenario for this installation will be single level house, existing wood fireplace that is to be replaced with a new Gas Fired. Gas should be available on the property. Does not include removal of existing wood burner, in many instances a builder may have to be involved. Included is:

10 meter run gas pipe
Gas valve and flexible connection as required
Flue installation (single story, supply not included)
Physical installation and fixing of Fire place
Commissioning and certification

9KG bottle installation / re-location (LPG)

PRICE: $ 449 including (GST incl) *conditions apply Book Now

Still have your LPG bottle sitting inside a cupboard supplying gas to you LPG gas hob? Are you aware that laws in New Zealand have changed deeming such installations as “unsafe” and non-compliant? Whether you are selling your home and are now required to bring the installation up to standard, or wanting maintain a safe environment, this special installation deal offers the solution for most scenarios. Included is:

5 meter gas pipe run to exterior wall
Gas bottle regulator and hose
All labor and involved materials
Gas certificate (PS3)

This special excludes the supply of a LPG bottle, please advise in your booking details if needed.

Gas Hob (gas cook top) installation / re-location (Natural Gas and LPG)

PRICE: $ 599 including (GST incl) *conditions apply Book Now

Whether you are replacing your existing electrical hob or installing new, this deal includes everything that you need. Available for both LPG and Natural gas. Included is:

Up to 5 meters of gas pipe from Hob to energy source (gas meter supply pipe or LPG bottle) (Back to back)
All required valves
Gas Flexible connection
All relevant labour and involved materials
Gas certificate (PS3)

NOTE: An additional fee of $ 130 including GST will apply for free standing ovens (stoves). This is to allow to secure oven to the wall and supply a long flexible connection to allow for maintenance and cleaning as per NZBC. Ovens wider than 900mm will require a second person for lifting. Euro Plumbing generally accept client help in this instance to prevent further cost. This special excludes the supply of a LPG bottle, please advise in your booking details if needed. To ensure the installation complies please see the drawing below

gas_hob_installation_requirements

Requirement 1 Overhead clearances — (Measurement A) Range hoods and exhaust fans shall be installed in accordance with the manufacturer’s relevant instructions. However, in no case shall the clearance between the highest part of the hob of the gas cooking appliance and a range hood be less than 600 mm or, for an overhead exhaust fan, 750 mm. Any other downward facing combustible surface less than 600 mm above the highest part of the hob shall be protected for the full width and depth of the cooking surface area in accordance with Clause 6.10.1.2. However, in no case shall this clearance to any surface be less than 450 mm. (b) Requirement 2 Side clearances—(Measurements B and C) Where B, measured from the periphery of the nearest burner to any vertical combustible surface is less than 200 mm, that surface shall be protected in accordance with Clause 6.10.1.2 to a height C of not less than 150 mm above the hob for the full dimension (width or depth) of the cooking surface area. Where the gas cooking appliance is fitted with a ‘splashback’, protection of the rear wall is not required. (c) Requirement 3 Additional requirements for freestanding and elevated gas cooking Appliances—(Measurements D and E) Where D, the distance from the periphery of the nearest burner to a horizontal combustible surface is less than 200 mm, then E shall be 10 mm or more, or the horizontal surface shall be above the trivet.

NOTES: 1 Requirement 3 does not apply to a freestanding or elevated gas cooking appliance which is designed to prevent flames or the cooking vessels from extending beyond the periphery of the gas appliance. 2 The ‘cooking surface area’ is defined as that part of the gas appliance where cooking normally takes place and does not include those parts of the gas appliance containing control knobs. 3 Consideration is to be given to window treatments when located near cooking appliances.

GAS APPLIANCE SERVICING

WATER HEATING APPLIANCES PRICE: $299 including (GST incl) *conditions apply Book Now

COOKING APPLIANCES PRICE: $189 including (GST incl) *conditions apply Book Now

SPACE HEATING APPLIANCES PRICE: $249 including (GST incl) *conditions apply Book Now

Our Appliance Service includes the following:

Visually inspect ALL the gas pipe work
Visually inspect gas appliance, flues and ventilation
Working pressure at meter and standing pressure
strip clean or check; Burners, Injectors, Pilot assembly, Lint arresters, Flue ways, Heat exchanger, Fan, Gas taps/valves thermostats, ignition device
Follow commission procedure; controls, solenoids, fan pressure switch, regulator, thermistor, thermostat, by-passes
General components; lights, timers, flicker devices, air / room thermostats and controls
Combustion performance analysis; CO / CO2 ratio (data-plate VS actual)
Gas Rating the appliance as per manufacturing specification
Final ventilation, spillage and tightness test